So here are the Chinese Tablet firmware files of the most sought after devices, also note that the files are usually compressed with WinRAR or are direct.

Next you can return or go to the article that shows you how to flash your device here after downloading your Firmware File. Update: Read this article before posting any requests below !!! What do I do next? In order for me to help you please comment and tell me the following and I will Add your Firmware to this article and also give you a direct link to downloading it so you can flash your Tablet, I will need the:ĭo that and I will Find your Firmware for you. Let me Help You Find your Tablet Firmware

So now I need to search in Google for “ A13 CB-M RU 94V-0 Firmware” or you can check below I have included a detailed list of the most sorted after firmwares including the one for the tablet used in this tutorial. That’s it you have just found your Motherboard ID and Processor, in this case the board in the tablets ID was: CB-M RU 94V-0 Last look on the board for a number its usually at the top section and it’s clearly written, this will be your Board ID, record it: Look on the main part of the board and you should see a processor look out for A13 or A10 marked on them clearly:ĥ. Once both halves separate, carefully move them apart and watch out for wires such as the one that runs from the speakers.Ĥ. Once you have found the seems, use a tool set such as the ones used in opening phones or a blunt object and force it into the seems,its best to start around the charge port in most cases, the parts will separate with little trouble as long as you are firm-do not break the clips that hold both halves together but separate the halves until the entire thing comes apart.You can refer to the video for details instructions.ģ. Tablets do not have screws that seal them in most cases so you will have to find the seems that hold both halves together.Ģ.

To find out both you will need to open your Tablet, do not panic it’s not as bad as it sounds trust me, here are the steps:ġ. The two main type of processors that you will find on your tablet are usually the A13 and A10 processors respectively. Alldaymall, Irulu, GPad or so on but beneath they are sporting similar hardware and all you have to do is find a firmware that matches the board ID and the processor or ones thats close and you can flash your tablet and have it functioning as new. The process of identifying your tablets firmware begins with knowing your Tablets Processor and board ID, believe it or not most of these entry-level Chinese tablets are usually sporting similar boards and processors for the most part, the names of the devices might change e.g. How to identify your Tablets Processor and Board ID?

7 inch hdmi allwinner a33 tablet